MLL-A-355 LD PUMPED ALL-SOLID-STATE LASER Wavelength 355nm

$5,900.00

MLL-A-355 LD PUMPED ALL-SOLID-STATE LASER Wavelength 355nm All solid state laser is made features of ultra compact, long lifetime, low cost and easy operating, which is used influorescence sensors, Raman spectrum, laser printing, holography, laser display, submarine communication, biomedicine, laser lighting show, etc. MLL-A-355 LD PUMPED ALL-SOLID-STATE LASER Wavelength 355nm Wavelength (nm) – 355±1 Operating…

Category:

Description

MLL-A-355 LD PUMPED ALL-SOLID-STATE LASER Wavelength 355nm

All solid state laser is made features of ultra compact, long lifetime, low cost and easy operating, which is used influorescence sensors, Raman spectrum, laser printing, holography, laser display, submarine communication, biomedicine, laser lighting show, etc.

MLL-A-355 LD PUMPED ALL-SOLID-STATE LASER Wavelength 355nm

Wavelength (nm) – 355±1
Operating mode – CW
Output power (mW)1 – 10-50
Power stability (rms, 4 hours±3℃) – <3%, <2%, <1%
Spectral line width (nm) – <0.2, <0.003
Transverse mode – TEM00
Noise of amplitude (rms, 1Hz-20MHz) – <1%
M2 – ~3.0
Beam diameter at the aperture (1/e2, mm) – <3.0
Beam divergence, full angle (mrad) – <3.0
Polarization ratio – >100:1 Horizontal (Vertical optional)
Warm-up time (minutes) – <10
Pointing stability after warm-up (mrad) – <0.05
Cooled method (Water cooled) – WCH-580
Beam height from base plate (mm) – 52.4
Operating Temperature (°C) – 10-35
Modulation option – DC-1kHz; TTL and Analog optional
Power supply (100-240VAC) – PSU-W-FDA
Expected lifetime (hours) – >10000