10 bars 500W macro channel diode laser LLD handle Model O repairing and replacement service for laser hair removal machine

This 808nm hair removal handpiece model O is made of 10 bars laser stack with 500W optic power. The laser bars in this handpiece is similar with VS-MI-60-12-AlmaSopranoICE-D. Their difference: Sopranoice have 12 bars, this Model O handpiece have 10bars.

Because of the macrochannel cooler, the cooling capacity is not good enough of this Model O handpiece. Most of these handpieces will be broken after 1-2millions shots, then the laser stack in it will burt out.

We remove the old burnt bar and replace with new bar. After that, the handpeice will become as a new one.
macro channel diode laser LLD handle repairing Procedure:

Chioce A: Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you.

Chioce B: if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old hadnpiece.

Diode laser LLD handle repairing Advantages:

1.The newest Ausn mounting technology will be applied when repairing.

2.Diode laser bars are made in Germany

3.After repair, the handpiece will be as a new one with life time much longer than before.

4.All technical support of hair removal machine is avaliable. Such as handpiece parts, electonic board, program, cooling and etc.